Products
Oil filter
Original details can effectively prevent the abnormal wear of the internal parts of the engine, extend the service life of accessories and reduce maintenance costs. To ensure the performance of your device, it is strongly recommended to use original accessories!
Description
marker
Introduction to the product
The use of poor -quality spare parts can lead to wear of the piston, the liner of the cylinder and the rod of crankshaft. The use of non -original parts will lead to a decrease in the efficiency of the engine, and in case of such a malfunction as internal sintering of the engine, repair will require large costs. Original details can effectively prevent the abnormal wear of the internal parts of the engine, extend the service life of accessories and reduce maintenance costs. To ensure the performance of your device, it is strongly recommended to use original accessories!
If the unstoped oil directly enters the engine system, then if there is a gap in the adhesive part, contaminated oil will enter the engine without filtering. When checking the condition of the adhesive part by bubble, it was found that bubbles form in the gap between filter paper and the side of the by -product. Such products not only do not perform a filter function, but also cause great harm to the internal engine.
Judging by the results of testing the filter element to multiple pressure blows, the original details do not break even with multiple pressure blows, while non -original details fail after a certain number of blows. In addition, an insufficient amount of engine oil can lead to a decrease in the efficiency of lubrication and cooling, which can lead to damage to the internal parts of the engine.
Comparison of filtering effectiveness
Compared to original details, the effectiveness of filtering non -original parts is only 70%. Filter paper has a narrow surface and easily clogs, which leads to a reduction in the service life of the filter element. Therefore, the filter ability of the filter element of the secondary market is insufficient, which can easily lead to its failure. For better service of your machine, use original spare parts for Hitachi construction equipment.
Contact us
Related popular products
Hitachi 470h-3-100006
Restored, painted, normal performance, bucket 2.5 cubic meters, was used in coal mines.
19 Hitachi year 300-100517
It was manufactured in 2019, the production of 4900 hours, the counterweight is painted, the remaining parts are in the original condition, it works normally, a bucket of 1.5 cubic meters, was used on a stone career.
22 years chitachi 500
Introduction to the Hitachi 500 product at the end of 2022, a top configuration, a new car, ...
Hitachi 360H-3G-102808
Restored, fully painted, normal performance, bucket 1.6 cubic meters. m, used in the construction of the railway.
18 years old Sanya 305-31568
It was produced in 2018, developed 4800 hours, original paint, it works normally, a bucket volume of 1.6 cubic meters, was used for municipal construction.
Rail
High -quality steel has been chosen and an advanced heat treatment technology was applied to guarantee the reliability and durability of components with excellent gap strength.
Hitachi 360H-3G-102688
Partially painted, normal performance, bucket 1.6 cubic meters, is used in coal mines.
Modern 275
Introduction to the product hydraulic excavator Hyundai 275 with a straight shovel, volume of bucket ...
19 Hitachi year 360k-5A-600628
Year of manufacture: 2019. The operating time is 9,500 hours. Complete painting of the body. The technical condition is regular. The volume of the bucket (scoop) is 1.6 cubic meters. For stone -gripmers.
Hitachi 240-3-100503
Restored, fully painted, normal performance, bucket 1.3 cubic meters.
Too heavy 130
Cummins engine F4.5, 96 kW, Hengli hydraulic system, bucket volume 0.66 m³, new 2024 equipment.
Dusan 260DX
Introduction to the product Hydraulic excavator with a straight shovel of DOOSAN 260DX, workers in ...
25 years XCMG 60-10339
Year of manufacture: 2025, new machine, without developing. The volume of the bucket (scoop) is 0.22 cubic meters.
Restored disintegrator for car scrap 102600
Converted ： used to disassemble and sort car models of minibuses, cars, SUV, MPV and others.
19 year chitachi 250k-600367
It was manufactured in 2019, the production of 680 hours, original paint, normal performance, an original machine with a set of pipelines, a bucket volume of 1.3 cubic meters, was used on a stone career.
18 Komatsu 460-0514
It was manufactured in 2018, the production of 4500 hours, original paint, normal performance, bucket volume of 2.5 cubic meters, was used in an open coal section.
Please leave us a message
- Russian
- English
- French
- German
- Portuguese
- Spanish
- Japanese
- Korean
- Arabic
- Turkish
- Italian
- Indonesian
- Swedish
- Azerbaijani
- Belarusian
- Bengali
- Bosnian
- Bulgarian
- Telugu
- Ukrainian
- Uzbek
- Vietnamese